Our Dynamic Audi Tail Lights are designed for the A4/S4. We’ve provided detailed wiring instructions and accompanying photos to guide you through the installation process. Please note, while comprehensive, installation may not be straightforward for all users.
We recommend reading the entire instruction guide first.
This will help you understand the complete process and identify the initial steps before you begin.
Step One: Route the Through-Light Wire
Begin by feeding the through-light wire through the designated hole, as illustrated in the accompanying image.
Step Two: insert the pins into their connectors
Again, insert the pins into their connectors, then plug these connectors into their sockets.
- Observe wire colors carefully:
- Connect the black wire to black.
- Connect the red wire to red.
- Connect the white wire to white.
Step Three: Connect to License Plate Light
Connect the black connector directly to your vehicle’s license plate light connector. We’ve provided a plug-and-play solution, so no wire cutting is necessary.
Step Four: Connect the Remaining Wires
You’ll find three additional connectors: green, white, and brown.
- Connect the green wire to the matching green wire.
- Connect the brown wire to the matching brown wire.
- Do not connect the white wire; insulate it securely with electrical tape.
Step Five: Secure the Black Module
Secure the black module in a discreet location where it won’t interfere with any other components. As shown in the image, a good spot is often within the trunk’s interlayer.
Step Six: Route the Red Wire
Route the red wire to the fuse box, which is located on the left side of the trunk.
Step Seven: Connect the Red Wire to Power
Route the red wire to the fuse box located on the left side of the trunk. Connect this red wire to a constant power source (the positive terminal of the battery) at the specific fuse box location shown in the accompanying images.
Step Eight: Installation Complete
If you encounter any issues during installation, please don’t hesitate to contact us. We’ll have our engineers review your concerns.
Phone/Whatspp:+1-281-425-5242
Leave A Comment